Chairpersons Wolfgang Luber (EADS) Peter Lee (Imperial College) Jurij A. Nozhnitsky (CIAM) Georgij N. Zamula (TsAGI) Session 4.1 - Aeroelasticity and Dynamics Monday Afternoon/ 4 July 2005  Chaired W. Luber, EADS and M. Zichenkov, TsaGI Tolstoy hall 4.01.01 14h00    Review of the European Research Project "Active Aeroelastic Aircraft Structures" 3AS    J. Simpson, EADS-Deutschland Military Aircraft, Muenchen, DE L. Anguita-Delgado, EADS-CASA B. Nilsson, SaaB, SE V. Vaccaro, Alenia, IT G. Kawiecki, GAMESA, SP         4.01.02 14h25   Design, Manufacture and Wind Tunnel Testing of the Multi-Functional European Research Aeroelastic Model (EuRAM)   M. Zichenkov, G. Amiryantz, Yu. Mullov, S. Shalaev, TsAGI, Zhukovsky, RU         4.01.03 14h50   Numerical Studies of Aeroelasticity / Strength / Aerodynamics on European Research Aeroelastic Model (EuRAM)   S. Kuzmina, TsAGI, Zhukovsky, RU F. Ishmuratov, V. Chedrik, V. Mosunov, A. Kudryashow, Y. Naiko, TsAGI, RU         4.01.05 15h15   Development of Adaptive Stiffness Systems for an Active Aeroelastic All-Moving Vertical Tail   J.-E. Cooper, M. Amprikidis, Univ. of Manchester, GB S. Ameduri, CIRA, IT J. San Millan, INTA, ES         4.01.06 15h40   Stability of 3D Motion of Helicopter Rotor Blade   S.-A. Mikhailov, E. Nikolaev, N. Shilova, Kazan Tupolev State Technical Univ., Kazan, RU         4.01.07 16h05   The Experience of Ground Vibration Tests of Flexible Flying Vehicles Using PRODERA Equipment and Some Additional Tasks   V. Smyslov, P. Karkle, TsAGI, Zhukovsky, RU K. Dijkstra, PRODERA, FR         4.01.08 16h30   Shimmy Model of Aircraft Landing Gear and Quadratic Forms   V. Goncharenko, ASTC, Kyiv, UA A. Obolensky, Inst. Of Mech., Kyiv, UA         4.01.09 16h55   Analytical Investigation of Plate Flutter in Supersonic Gas Flow   V. Vedeneev, Moscow State University, Moscow, RU Session 4.2 - Composite Structures Tuesday Morning/ 5 July 2005  Chaired by J. Wiggenraad, NLR and V. Vasiliev, Central Research Institute for Special Machinery Tolstoy hall 4.02.01 9h00    Proton - M Composite Interstage Structures: Design, Manufacturing and Performance    V. Vasiliev, V. Barynin, A. Razin, CRISM, Moscow, RU Yu. Bakhvalov, V. Molochev, S. Petrokovskii, KSC, Moscow, RU         4.02.02 9h25   Optimal Design of Composite Lattice Structures for Aerospace Applications   G. Totaro, CIRA, Capua, IT Z. Gürdal, Delft Univ. of Tech., NL         4.02.03 9h50   DAMOCLES 2 - Structural Analysis and Optimisation of an "All Composite" Damage Tolerant Wingbox   A.-M. Clarke, C. Williamson, QinetiQ, Farnborough, GB R.-J-.C. Creemers, NLR, NL A. Riccio, CIRA, IT         4.02.04 10h15   Structural Bending Behaviour of an All-Composite Wing-Box with Delamination   A. Riccio, N. Tessitore, CIRA, Capua, IT G. Leofanti, M. Marchetti, Univ. of Roma "La Sapienza", IT         4.02.05 10h40   On the Modelling of Impact Damage Growth in Composite Structures   S.-J. Lord, M.-F. Ngah, QinetiQ, Farnborough, GB         4.02.06 11h05   The Variant of Two-Component Media Mechanics   T. Karimbaev, CIAM, Moscow, RU         4.02.08 11h30   Design of Supercritical Composite Helicopter Driveshafts: Theoretical and Experimental Study   O. Montagnier, Centre de Recherche de l'Ecole de l'Air, Salon Air, FR Ch. Hochard, LMA, Marseille, FR Session 4.3 - Structural Analysis Tuesday Afternoon/ 5 July 2005  Chaired by A. Riccio, CIRA and G. Zamula, TsAGI Tolstoy hall 4.03.02 14h00    Global Structural Optimisation with Genetic Algorithms    C. Gallet, AIRBUS France, Toulouse, FR         4.03.03 14h25   Efficient Non-Linear Domain Decomposition Methods for Post-Buckling Analysis of Large Aeronautical Structures   P. Cresta, S. Guinard, EADS Suresnes, FR S. Guinard, O. Allix, C. Rey, ENS, Cachan, FR         4.03.04 14h50   Simulation of Environmental Effects on the Damage Behaviour of Fibre Metal Laminates   P. Linde, AIRBUS, Hamburg, DE H. De Boer, ALE, Delft, NL         4.03.05 15h15   Simulation of Bird Strike on a Composite Leading Edge   G. Lampeas, Th. Kermanidis, S. Pantelakis, Univ. of Patras, GR         4.03.06 15h40   Analysis of Vibrations Stress Localization in Turbomachine Blading   Y. Vorobyov, O. Tyshkovets, V. Romanenko, M. Storozhenko, Institute of Machinery Construction Problems, Kharkov, UA         4.03.07 16h05   Problems of Structural Design, Strength and Reliability Prediction for Bimetallic Blisks, Manufactured by HIP Made out of Powder and Cast Ni-Base Super Alloys for Gas Turbine Usage   L. Magerramova, T. Zakharova, CIAM, Moscow, RU         4.03.08 16h30   Analysis of Blade Resistance to Bird Strike using Different Computation Models   G. Mel'nikova, B. Shorr, CIAM, Moscow, RU         4.03.09 16h55   Advanced Structural Fastening and Jointing Methods Utilizing Synergistic Cold Expansion and High Interference Fit Methodology   L. Reid, Fatigue Technology Inc., Seattle, US Session 4.4 - Space Vehicles and Propulsion Wednesday Morning/ 6 July 2005  Chaired by G. Ramusat, ESA and T. Karimbaev, CIAM Tolstoy hall 4.04.01 9h00    An Overview of the FLPP Technology Developments in Structures for the European Next Generation Launcher    G. Ramusat, J. Breteau, J. Ackermann, ESA, Paris, FR         4.04.02 9h25   Characterization and Consideration of Dynamic Damping Generated by Material Plastic Strain   S. Sagnier, Y. Forton, SNECMA, Vernon, FR         4.04.04 9h50   Postbuckling Analysis of the ARIANE 5 Frontskirt (Rosetta Mission)   H. Lehar, University of Innsbruck, AT G. Schullerer, MAN, Augsburg, DE         4.04.06 10h15   Thermo-Erosion Destruction of Materials in Supersonic Heterogeneous Flows   D. Mikhatulin, Y. Polezhaev, Institute of High Temperatures RAS, Moscow, RU - D.-L. Reviznikov, STU, Moscow, RU         4.04.08 10h40   A Concept for Space Debris Shield Design   N. Smirnov, A. Kiselev, V. Nikitin, M. Lomonosov, Moscow State University, RU         4.04.09 11h05   Automatic Inspection of Turbine Blades Using 5-Axis Coordinate Measurement Machine   A. Lin, Taiwan University of Science & Technology, TW Session 4.5 - Materials: Synthesis and Processing Wednesday Afternoon/ 6 July 2005  Chaired by P. Lee, Imperial College and Yu. Nozhnitsky, CIAM Tolstoy hall 4.05.01 14h00    New Ceramic Materials from the Melt for High Temperature Applications    M. Parlier, D. Boivin, ONERA, Châtillon, FR N. Piquet, L. Mazerolles, M.-F. Trichet,CNRS, Vitry s/Seine, FR         4.05.02 14h25   Integrated Modeling for the Manufacture of Ni-Based Superalloys Discs from Solidification to Final Heat Treatment   P.-D. Lee, A. Kermanpur, M. McLean, Imperial College London, GB S. Tin, Univ. Cambridge, GB M. Rist, Open Univ., GB         4.05.03 14h50   Liquid Fraction Evolution during Casting of Ni-Base Superalloys with Emphasis on the Last Stage Solidification   H.-B. Dong, Univ. of Leicester, GB N.-D. Souza, P.C.F, Derby, GB B. Kantor, P. Hooper, TSE, Bristol, GB         4.05.04 15h15   Superalloy Hollow Sphere-Based Foams : Process Characterization and Modeling   J.-H. Nadler, F. Paun, ONERA, Châtillon, FR Y. Bréchet, ENSEEG, FR         4.05.05 15h40   Fatigue crack growth in 2024-T351 alloy after laser beam influence on the surface layer stress-state   A.. Shanyavskiy, NPO ZKTI, UA         4.05.06 16h05   Technological Ensuring of the Compressor Blades Durability for Aircraft Gas-Turbine Engines   B. Lyashenko, V. Mirnenko, A. Rutkovskiy, Instit.of Strength Problems,Kiev, UA         4.05.07 16h30   Ultra High Temperature Diboride Ceramics for RLV's Hot Structures   L. Scatteia, F. De Filippis, G. Marino, CIRA, Capua, IT         4.05.08 16h55   New Method of Coated Gas Turbine Blades Remaining Life Time Determination   L. Getsov, P. Krukovski, N. Mozaiskaja, A. Rybnikov, K. Tadlja NPO ZKTI, UA Session 4.6 - Materials Characterisation and Properties Thursday Morning/ 7 July 2005  Chaired by T. Khan, ONERA Tolstoy hall 4.06.02 9h00   Relationship of Stress Rupture and Crystallographic Orientations for Ni-Base Superalloys Single-Crystal   E. Golubovskiy, I Svetlov, Y. Nozhnitsky, CIAM, Moscow, RU         4.06.03 9h25   Identification of Constitutive Equations for Constituents of Thermal Barrier Coatings Using a Micro-Indentation Instrumented Technique   P. Kanoute, ONERA, Châtillon, FR         4.06.06 10h15   Design and Test of Adhesive Bondings on Solid Rocket Motor Cases at EADS Space Transportation   Y. Coste, EADS-ST, FR         4.06.07 10h40   Space Environment and its Effects on Spacecraft Materials   M. Dinguirard, ONERA, Toulouse, FR         4.06.08 11h05   Growth of Cracks in Alloys of a Titanium and Nickel at a Constant Load Under Operation of a Creep   A. Fishgoit, CIAM, Moscow, RU         4.06.09 11h30   Prediction of fatigue crack growth in aero engine disks   N.Tumanov, CIAM, Moscow, RU Session 4.7 - Service Performance and Life Assessment Thursday Afternoon/ 7 July 2005  Chaired by T. Khan, ONERA and M. Kolotnikov Tolstoy hall 4.07.02 14h00   Development of the RRJ Airplane Wing Fatigue Test Spectra   V. Strizhius, Sukhoi Civil Aircraft Company, Moscow, RU         4.07.03 14h25   Actual Loading Spectra Monitoring and Residual Lifetime Evaluation Philosophy and Application to ISS Russian Segment Structure   A. Likhoded, A. Anisimov, N. Panichkin, D. Ponomarev, V. Sidorov, N. Vvedensky, TsNIIMash, Korolev, RU         4.07.05 14h50   First Steps Towards a 3D Low Cycle Fatigue Analysis of Liquid Rocket Combustion Chamber Walls   J.-R. Riccius, E. Zametaev, O.-J. Haidn, DLR, Lampoldshausen, DE G. De Boisvilliers, FH Aachen, DE         4.07.06 15h15   A Test and Evaluation of Rocket Combustor Life Prediction Methodologies   I.-K. Sung, W. Anderson, Purdue Univ., West Lafayette, US         4.07.07 15h40   Fatigue Resistance under Random Loading   G. Nesterenko, V. Basov, TsAGI, Zhukovsky, RU         4.07.08 16h05   Reduction of Material Life by Hydrogen Environments and / or Thermal Ageing   P. Jouinot, V. Gantchenko, Supmeca, St-Ouen, FR